2-way bookshelf
If space is limited the Q350 will not limit your musical enjoyment, a Uni-Q driver and clever port design let it open up the sound. With KEF's signature Uni-Q driver array and a Computational Fluid Dynamics (CFD) port, the Q350s deliver detailed natural sound with high clarity and tight bass.
Q Series takes cutting-edge acoustic technology from ranges including The Reference and Blade to a wider selection of people. Representing exceptional value, Q Series unlocks detail and depth in whatever you choose to listen to.
Technology
"Sit anywhere" Uni-Q sound
The Uni-Q driver array places the tweeter in the centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever. The result, enhanced by KEF's 'tangerine' waveguide over the tweeter, is a more accurate three-dimensional sound that's dispersed evenly throughout the room.
Tweaking the tweeter
With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
A word about drums and bass
The Q Series reproduces the nuances of bass instruments with ease. With a larger roll surround and new suspension KEF drivers produce cleaner bass at high volumes.
A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.
A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.
New system design
Putting the Uni-Q driver in its own sealed cabinet reduces the load on the cone and increases clarity and detail while delivering cleaner bass. Midrange clarity is enhanced by driver improvements that mean the DC blocking capacitor to be eliminated from the crossover, allowing a more natural roll-off between drivers.
Full-length magnetic grilles are optional.
Weight
7.6kg
Dimension (H x W x D)
358 x 210 x 306 mm
362 x 210 x 306 mm (with Rubber Feet)
362 x 210 x 306 mm (with Rubber Feet)
Design
2-way bass reflex
Unit Measurement
Pair
Sensitivity
87dB (2.83V/1m)
Frequency Range Free Field
42Hz (-6dB)
Frequency Response
63Hz-28kHz (±3dB)
Maximum Output
110dB
Amplifier Requirements
15-120W
Nominal Impedance
8 Ohms (min.3.7 Ohms)
Drive Units
165mm (6.5in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
25mm (1in.)vented aluminium dome HF
Crossover Frequencies
2.5kHz
Finishes
Satin Black / Satin White
