sE Electronics T2 Large Diaphragm Multi-Pattern Condensor Microphone

sE Electronics

$1,395.00
Write a Review
Adding to cart… The item has been added

With the T2, your transients will never be the same again.

The versatility of the sE4400a's shockmount, patterns, filters and pads, plus a titanium diaphragm for the most immediate percussion, bass, guitar & vocal transients you've ever heard.

This mic is the ultimate combination of solid state performance and versatility. Based on the chassis and feature spec of the acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, it delivers full and perfectly balanced mid and low frequencies, while its titanium capsule produces un-hyped but ultra-detailed HF response.

It is thus ideally suited for any percussive sounds - including kick & toms, the attack of a guitar or bass, hammer action of a piano, and hip-hop vocals.

THE TITANIUM DIAPHRAGM

Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances.

The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease.

CUSTOM SHOCKMOUNT + CHASSIS

The T2 shares the shockmount of the 4400a. Here's what TapeOp has to say about it:

"I don't think I've ever started a mic review by introducing the accessories first. But given the innovative design of the shockmount included...I can't help but get that out of the way so I can then move on to telling you what a great buy the mic itself is."
-Tape Op Magazine

The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.

 
 
SPECIFICATIONS

Capsule Type: Hand-Crafted True Condenser

Diaphragm: 32mm Twin Titanium/Mylar

Directional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8

Frequency range: 20 Hz - 20 kHz

Impedance: 50 Ohms

Sensitivity: 25.12 mV/Pa (-32 dB)

Max SPL: 122/132/142 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz)

Signal to Noise Ratio: 78 dB

Self Noise: 16 dB(A)

Pass Filter Switch: 60/120 Hz

Preattenuation Pad: -10/-20 dB

Matching Connectors: XLR3F

Power requirement: 48V phantom

Weight: 280g / 9.88oz

 
t2-cardioid.jpeg
t2-hypercardioid.jpeg
t2-figure-8.jpeg
t2-omni.jpeg

Videos Hide Videos Show Videos